How To Fix Nintendo Switch Won’t Turn On

After a long day of work, you’re ready for a relaxing evening of gaming, and no one can stop you from playing SuperSmash.

When you turn on your Nintendo Switch, it abruptly stops working and does not turn on? Ah, it appears that your intentions for a flawless and pleasant evening have been thwarted.

But don’t worry, we’ve got you covered in this article. We’ve compiled a list of frequent causes and solutions for “Nintendo Switch Won’t Turn On” issues.

How To

Let’s go on to determining how to resolve the problem.

How Do I Repair My Nintendo Switch?

Take a peek around.

Solution 1. Look for a Faulty Charging Cord

Frequently, the charging cord is to blame for all of these problems. This type of problem is most commonly seen with portable cords owing to pin or adapter bending.

Furthermore, the majority of them degrade over time. As a result, the first and most important action should be to check for any cord-related issues –

Connect the connection to the console and inspect the wire for this. Your console may be damaged and should be replaced if the wiring feels loose.

Also, look for any areas that have melted, burned, or become discoloured. Repair any damage if there is any.

This problem is most likely to occur with portable cords. As a result, look for bent pins, adapters, or frayed wires.

Additionally, if you are using a charging cord other than the original Nintendo Switch charging cord, it is possible that the battery has been damaged and that the battery life has been impacted.

To do so, just replace or repair the charging cord. Simply replace your cord if it has been damaged. Also, if you’re using a third-party charger, get rid of it and replace it with the original.

Using the original charger does not do any harm, but it does give you with improved battery life and performance, as well as a lower risk of device damage.

Read Also:

  1. 0xC0000142
  2. Discord Won’t Open
  3. Microsoft Compatibility Telemetry

Solution 2. Make Sure Your Nintendo Switch is Fully Charged

Our second suggestion is to charge it. It may appear simple, yet it has been a source of frustration for many. It’s conceivable that the cord wasn’t properly plugged in, or that there’s a problem with the cord (See method 1).

To charge, simply attach the wire to the console. Finally, connect to a power source to charge. Also, make certain that the connection is flawless.

It may take some time for the screen to appear if the battery is entirely depleted. After that, wait a few moments to see if your gadget turns on. Enjoy your evening if it works, but if it doesn’t, move on to the next one.

Solution 3. Restart the Computer by Pressing the Power Button

One of the most typical problems encountered by clients is a firmware issue. For the most part, the force restart method has worked to resolve these issues. It is accomplished by pushing the power button in a unique way.

Here’s how to do it if you don’t know how –

Step 1: For 12 to 15 seconds, press and hold the power button.

Step 2: Finally, let go of the button.

Step 3: After completing step 2, press the button three times and hold it down the third time until the Nintendo Switch turns on.

Check to see whether your screen turns on as a result of this. If that doesn’t work, move on to the next one.

Solution 4. Carry out a Hard Reset

If you try all of the aforementioned ways and still don’t get a result, it’s possible that the problem is with the software.

We’ll have to try a hard reset, sometimes known as a factory reset, to fix this. Factory resets the device, including all games and data, or deletes all data and starts over from scratch.

This will increase the device’s performance as well. The following are the steps to perform a hard reset –

Step 1: To enter Maintenance Mode, long press and hold both the power and up/down volume buttons for 5 seconds.

Step 2: Select Initialise Console without Deleting Save Data and press OK in maintenance mode. Tap on Initialise Console if you want to remove the saved data.

Step 3: Finally, check to see if the screen is turned on by following the instructions.

Read Also:

  1. MRT.exe
  2. DNS_Probe_Finished_Bad_Config


That was all of our solutions to the problem of “Nintendo Switch Won’t Turn On.” We hope the above strategy worked for you and that you are currently enjoying the rest of your day. We hope you found the information in this article useful.