Several Desktop machines have reported this “Audio renderer malfunction.” When users try to start a Youtube video, they see the notice “First restart this machine.”
The issue isn’t restricted to a specific Wins edition, and it’s expected to spread to other platforms such as Chrome, Edge, Opera, and Mozilla Firefox.
Many consumers who have encountered the issue claim that it occurs whether they use iTunes or the built-in music player.
What Is The ‘Audio Renderer Error’? ‘Please Restart Your Computer.’ YouTube Error?
We looked into this by looking at a range of customer complaints as well as the steps they took to either avoid or completely resolve the issue.
According to our results, a variety of illnesses have been recognised as triggering comparable warning alerts –
Audio drivers fail – This appears to be a frequent problem with some mobo types. Existing users have discovered that removing > inserting their headphones, rebooting the system, or temporarily deactivating the system’s audio drivers can help.
A conflict with both Wins Sounds and ASIO devices – This issue has been confirmed to occur when both the Wins Audio and ASIO adapters have different noise codec speeds. The solution in this situation is to synchronise these two rates.
Bug BIOS edition — In the case of Dell PCs, the issue is most usually linked to a faulty BIOS edition. Although Dell had patched the vulnerability, updating their BIOS to some of the most recent versions may be sufficient to resolve the issue.
How to Fix ‘Please Restart Your Computer’ Audio Renderer Error
This Audio renderer failure might be quite annoying while you’re streaming a YouTube video or listening to music.
As a result, the choices for correcting the problem appear to be listed below. Let’s move on to the possible solutions now that we’ve determined the possible causes.
Despite the fact that we’ve chosen cures that don’t necessitate changing a lot of things in the system, the majority of them are likely to be straightforward for everyone.
Method 1: Remove/Replace Headphones
As ludicrous as this approach may look, numerous afflicted customers have reported that unplugging and replugging their headsets solved the problem.
One such approach has been demonstrated to work with both sockets and USB headsets. If you’ve had a set attached, simply detach the headset wire unless you’re experiencing difficulties playing a clip on Youtube.
Keep in mind that it was most likely merely a temporary solution. Until you take action, the “Audio renderer problem” will continue. At some point, the message “Please restart your system” will show again.
If this technique doesn’t work for you and you’re looking for a more long-term answer, scroll down to the next option.
Method 2: Restarting Your Computer
The “Audio renderer issue” may be resolved by rebooting your machine, as mentioned by the problem notification. “Reboot your system first,” says the anomaly.
Nonetheless, the vast majority of those who have been affected believe that this technique (which is identical to Technique 1) is just temporary.
Customers who are encountering this issue have reported that they only get 20-30 seconds of multichannel audio before the warning sign appears again.
As a result, if Technique 1 doesn’t work, reboot your computer to see whether this temporary solution helps. Proceed to Procedure 3 if the problem notice repeats or if you want a long-term solution.
Method 3: Using the Audio Troubleshooter
Using a different sound exporter is another possible fix for the “Audio renderer issue.” To fix the “Just reboot your system” problem, utilise the built-in sound setup wizard.
The above-mentioned utility is basically a set of repair remedies for a variety of different hearing difficulties.
If the issue is actually caused by a known issue with Ms, running the sound troubleshooter will totally resolve the issue.
Read the following instructions for activating this sound troubleshooter –
Step 1: Press the Wins key plus R to open the Run dialogue box. Alternatively, you can get straight to the Troubleshooting part of a screen like the configurations screen by typing “ms-settings:troubleshoot” or pressing Enter.
Step 2: Simply go to Get on and select the Streaming Sound option under the Troubleshoot button. After that, you start your troubleshooter by activating this tool and selecting Start your troubleshooter.
Step 3: Maintain your composure until the preliminary case is resolved. After that, decide which piece of equipment is causing the “Audio rendering difficulty.” The notification instructs users to “first reset your computer,” following which they should click Proceed.
Step 4: Remain seated until the software has completed its analysis of the sound equipment’s potential problems. When an issue is detected, a solution will be given.
Step 5: Complete the on-screen instructions (choose ‘Okay, Deploy fix’ or ‘Okay, Access *menu’), then apply the changes.
Step 6: Restart your computer and check to see whether the problem has gone away during the restart.
Whether or not there is a “Audio rendering problem.” If the “Must reboot your computer” problem persists, follow the steps below.
Method 4: Disabling and Enabling The Audio Driver
Some consumers reported that they would be able to fix the problem without having to reboot their computer or run the fixer.
However, it appears that deactivating all sound adapters in computer remote access and then reactivating them after a few moments may have been sufficient to resolve the issue.
For many impacted clients, the aforementioned technique is the best-case scenario for resolving the “Audio rendering problem.”
Inaccuracy: “Reboot your system first.” This is how you can rapidly disable and enable the sound drivers –
Step 1: Press the Wins key plus R to open the Run dialogue box. After that, type “devmgmt.msc” and press Enter to open gadget Manager.
Step 2: Go to the gadget Manager and select the Audio, Graphics, and Gaming Consoles option. After that, disconnect each sound connections throughout the system by right-clicking and selecting Deactivate connection.
Step 3: Wait a few moments after disabling various sound connections under Audio, graphics, and gaming consoles before right-clicking and selecting Activate Connection to activate them.
Step 4: Go back to the action that produced the “Audio rendering problem” in the first place. Now restart your computer to see if the problem has been resolved.” inaccuracy
If you’re having issues or if the problem keeps reappearing, move on to the next method below.
Method 5: Uninstalling the Audio Driver
Another approach to resolving the “Audio rendering difficulty.” Reinstalling their sound drivers is one solution to the “Next reboot your system” problem.
Reverting to an earlier electronic edition might help if the crisis was caused by something like a technological flaw.
When users delete this sound system, the computer forces them to reload it. If you were working with damaged documents, this would also solve the problem.
This is how you quickly wind back this sound controller –
Step 1: Press the Wins key plus R to open the Run dialogue box. After that, type “devmgmt.msc” and press Enter to open gadget Manager.
Step 2: Double-click the media connection you want to hang in the Sound, Graphics, and Remote Controls menu.
Step 3: Navigate to the Driver section of your sound equipment’s specifications and click Revert Back Device. If this function isn’t available, select Disconnect Gadget.
Step 4: You should restart this system. When users choose to uninstall these sound drivers, Windows will reinstall the most recent version of device sound connection for you.
Step 5: Once the installation is complete, repeat the identical operation that caused the “Audio rendering error.” Please restart your computer to see whether the problem has been resolved.” inaccuracy
Method 6: Setting The Same Sample Rate
Unless you only have troubles when Cubase starts, you’ll be dealing with something like a mismatch of both the Wins Audio machine and the ASIO device setups.
Whether such a scenario describes your current situation, chances are you’ll be able to resolve it simply by ensuring that your Wins.
Audio device and ASIO adapter are both using the same sampling frequency (for instance 44.1k versus 48k). The following is a step-by-step guide on how to do it –
Step 1: Press the Wins key plus R to open the Run dialogue box. After that, type “mmsys.cpl” and press Enter to get to the Audio configurations panel.
Step 2: In the Sound panel’s Playback section, select the audio system that is causing the issue, and then choose Adjust.
Step 3: Under the Advance tab of your sound product’s parameters display, change the standard Format to 16 bits, 44100. (or a variety of default form which one desires to utilise). After that, select Add to save your set of standards.
Step 4: After that, go to the Sound section of one’s ASIO adapter setups. Once you’re there, change the sample frequency to the speed you specified in step 3 of the sound Recording style.
Step 5: Restart one’s computer to see if the problem has been resolved.
Step 6: However, if you’re encountering issues with this “Audio rendering difficulty,” continue to step 6. If you receive the “Now reboot your machine” warning, proceed to the next option below.
Method 7: Update BIOS (only confirmed on Dell computers)
Customers who had the problem on DELL laptops claimed that after upgrading the BIOS settings, the problem had gone away for good.
Although this method may work with a variety of brands, we’ve only been able to confirm that it works with Dell laptops.
Remember: If someone solves the problem in this manner on a different system, please let us know in the comments section below.
Caution: If users do not follow these steps correctly, the process of rebuilding the present BIOS system could be damaging to their machine.
You must proceed entirely at your own risk, regardless of whether users opt to do anything with it.
These BIOS connections, as well as the precise steps for changing the BIOS on a DELL Computer, will differ depending on the arrangement. Experts strongly advise reading Dell’s BIOS upgrades guidance section to avoid confusion.
When you’ve mastered the procedure, share the specific steps for creating a BIOS deployment disc and upgrading your BIOS to the most recent release.
Conclusion
We looked at what an Audio renderer problem on YouTube is, what causes it, and how to fix it on a specific computer in this article.
The simplest solution is to restart the computer, upgrade device components, and check for a variety of other potential problems.
The Audio renderer problem on YouTube is caused by the inability of programmes correctly calibrated also with hardware, although it might be caused by nearly any reason or device problems.
There appears to be a fair chance that this alert is produced by a flaw elsewhere in the system. As a result, users may choose to use a different device in order to avoid similar problems.
We assume the information was helpful; nonetheless, please let us know if you have any more suggestions for resolving the issue.
