Bad system config info error is a stop code error in Windows that checks for defects and reports processing issues. This causes the system to crash and the Blue Screen of Death to appear (BSOD).
It is primarily caused by problems with the system and registry files, as well as the Boot configuration Data(BCD) file.
Some BCD boot order files, especially older ones, may conflict with newer, more stable files. The PC will not boot up because of this mistake. The bug check error may also be caused by –
Hardware failure
settings
A sloppy driver
An essential update is being installed.
Well, it may be a very inconvenient problem, but it may be resolved using the following simple methods:
How to Fix the Error ‘BAD SYSTEM CONFIG INFO’
Take a peek around.
Method 1. Make Sure Your RAM and Hard Drive are up to Date
The bad system config info problem could be caused by the state of the RAM and hard drive. To inspect the state of your computer, open it and peek inside to verify if it is in good working order.
Also, make sure the SATA cables for the hard drives are correctly attached. If there is more than one RAM stick, remove the others and leave only one.
If the error disappears after removing any RAM sticks, there is most likely a problem with your RAM sticks.
Check the health of the RAM and hard drives if they are properly connected. If any faulty components are discovered, they should be replaced.
If your RAM and hard disc are in great working order and have proper connections, there could be another reason. Let’s move on to the next technique.
Method 2. Reinstall or Update the Driver
This problem, which results in BSOD errors, can also be caused by faulty or incompatible drivers. The remedy is to uninstall any drivers that appear to be malfunctioning or incompatible.
The following are the steps to take –
Step 1: Tap the start button and type device manager to open the window device manager.
Step 2: Next, tap Action in the device management.
Step 3: Next, check for hardware modifications and see if any devices have a yellow exclamation mark symbol next to them.
Step 4: Right-click on any problematic driver and select “Update Driver.”
Step 5: If the issue persists, right-click the driver and select “Uninstall device.”
The erroneous driver will be uninstalled. The driver will be automatically reinstalled after the PC is rebooted.
Method 3. Edit BCD Command
This issue can be caused by incorrect system settings, such as when the number of processors and memory quantity are not right.
Using a large number of CPUs also causes device heating, resulting in the BAD SYSTEM CONFIG INFO issue.
Furthermore, improper memory quantity numbers prevent the computer from booting up. The following methods can be used to tackle this problem –
Step 1: To begin, press the power button and then the start button.
Step 2: Next, hold down the shift key and tap restart.
Step 3: On the “pick an option” menu, select troubleshooting.
Step 4: After that, click “advanced option” and Command Prompt.
Step 5: The computer will restart, and you will be able to select an account from the Command Prompt blue screen.
Step 6: After that, press enter and enter your password.
Step 7: Type the commands below –
numproc numproc numproc numproc numproc numproc numproc numproc numproc numproc numproc numproc numproc nump
bcdedit/deletevalue bcdedit/deletevalue bcdedit/deletevalue bcdedit truncatememorybcdedit/deletevalue truncatememorybcdedit/deletevalue truncatememorybcdedit/delete numproc
bcdedit/deletevalue bcdedit/deletevalue bcdedit/deletevalue bcdedit truncatememory
numproc numproc numproc numproc numproc numproc numproc numproc numproc numproc numproc numproc numproc nump
bcdedit/deletevalue bcdedit/deletevalue bcdedit/deletevalue bcdedit truncatememorybcdedit/deletevalue truncatememorybcdedit/deletevalue truncatememorybcdedit/delete numproc
bcdedit/deletevalue bcdedit/deletevalue bcdedit/deletevalue bcdedit truncatememory
Step 8: Finally, shut off the command prompt and reopen Windows.
Method 4. Correct BCD Files
Corrupted BCD files can also cause this problem, preventing you from using safe mode or Windows entirely.
Follow the instructions below to repair it –
Step 1: First, boot your computer from the bootable DVD or USB flash drive.
Step 2: After that, click Next and then Repair your computer.
Step 3: Select Troubleshooting from the drop-down menu and then Advanced options.
Step 4: Next, select Command Prompt and type the following lines, pressing enter after each one.
/repairbcd bootrec
/osscan bootrec
/repairmbr bootrec
You’ll need a Windows 10 installation DVD or a bootable USB flash driver with Windows 10 for this method. If you don’t have one, you may quickly make one with the MEDIA CREATION TOOL.
Also, the last command will erase Master Boot records before re-creating them, so use caution. Close Command Prompt and restart your computer after the operation is completed.
Method 5. Take Care of the Registry
The Windows registry is where system settings and applications are saved. Windows startup, hardware loading, disc, and some Windows apps are all controlled by registers.
Well, this error can occasionally be caused by registry errors. The steps to solve it are as follows –
Step 1: First, start by booting from the Windows 10 or 11 installation DVD.
Step 2: Select Advanced Options from the Troubleshoot menu.
Step 3: Next, go to the command prompt and type the following commands:
C:WindowsSystem32config (cd C:WindowsSystem32config) (cd C:WindowsSystem32config) (cd C:
C:WindowsSystem32configDEFAULT DEFAULT. ren C:WindowsSystem32configDEFAULT DEFAULT.
old C:WindowsSystem32configSAM SAM. ren C:WindowsSystem32configSAM SAM.
C:WindowsSystem32config ren
SECURITY, SECURITY, SECURITY.
C:WindowsSystem32configSOFTWARE SOFTWARE ren C:WindowsSystem32configSOFTWARE SOFTWARE
old ren C:WindowsSystem32configSYSTEM SYSTEM. old ren C:WindowsSystem32configSYSTEM SYSTEM. old ren C:WindowsSystem32configSYSTEM SYSTEM.
Folders will be renamed and Windows will no longer be able to use them if you do this and hit Enter after each line. They can also be removed.
Step 4: After that, type the following lines –
C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32configRegBackDEFAULT C
C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32configRegBackDEFAULT C
C:WindowsSystem32configRegBackSAM C:WindowsSystem32configRegBackSAM
C:WindowsSystem32configRegBackSECURITY C:WindowsSystem32configRegBackSECURITY
C:WindowsSystem32configRegBackSYSTEM C:WindowsSystem32configRegBackSYSTEM
C:WindowsSystem32configRegBackSOFTWARE C:WindowsSystem32configRegBackSOFTWARE C:WindowsSystem32configRegBackSOFTWARE C:WindowsSystem32configRegBackSOFTWARE C:WindowsSystem32configRegBackSOFTWARE C
This method will copy all old files to the register’s backup and replace them.
Finally, exit Command Prompt and restart your computer.
Method 6. Restore the System
Users can also resolve this issue by doing a system restore. The steps are as follows –
Step 1: To begin, press the start button and then the power button.
Step 2: Next, hold down the shift key and select restart.
Step 3: Select advanced troubleshooting from the troubleshooting menu.
Step 4: After that, select System Restore.
Step 5: Finally, select a username and follow the on-screen instructions.
Step 6: Finally, select the desired restore point, click Next, and wait for the process to finish.
Method 7. Reset Windows XP/Vista/XP/Vista/
If none of the preceding methods worked, the only remaining choice is to reset Windows. This error will be resolved by resetting the device, which will clear all flaws and faults.
Follow the instructions below to reset your device –
Step 1: To begin, press the start and power buttons.
Step 2: After that, hold down the shift key and click restart.
Step 3: Next, go to troubleshoot and then’reset this PC.’
Step 4: Select “Only derive where Windows is installed and then simply remove my files” from the “Remove everything” menu.
Step 5: Finally, press the reset button and wait for the procedure to finish.
Before resetting, you should usually make a backup. Finally, a fresh copy of Windows will be installed, and any flaws will be removed. If the issue is a software issue, a reset should solve it.
Conclusion
All of these solutions have been proven to work for this problem, and they didn’t take very long to finish. We hope this post was helpful and that the problem was resolved.
