There Was A Problem Resetting Your PC in Windows 10

When users try to reset their computers, they frequently get the error “There was a difficulty resetting your PC, no modifications were done.” Resetting Windows provides you with a number of options for resolving errors.

Windows 10 has a built-in resetting feature that allows them to reset their computer. As a result, their Windows will revert to its default settings.

To cure the issues, the resetting option is considerably superior to reinstalling new Windows.

This is due to the fact that resetting is a speedier procedure that requires less time and space to complete. We’ve talked about the benefits of restarting the computer up to this point.

Error

Using the built-in function, we can reset our own PC. However, this option may not always work, and we may see an error notice that reads, “There was a difficulty resetting your PC.”

As a result, you will be unable to use Windows even after restarting. So, today, we’ll talk about some potential strategies for resolving this issue.

There Was A Problem Resetting Your PC Error Causes

We need to discover out the fundamental cause of the problem before leaping to conclusions. It can happen for a variety of causes, some of which are listed below. Let’s have a look at the reasons for this.

The PC you purchased came with Windows 10 pre-installed and was not updated from a previous version of Windows.

The compression approach was used by the PC designer to reduce the amount of disc space required for the already loaded software.
You’ve constructed your own USB recovery disc.

You may have selected reset this pc to delete all options after booting your computer to the USB recovery disc.

Read Also:

  1. ERR_CACHE_MISS
  2. ERR_NETWORK_CHANGED
  3. BAD SYSTEM CONFIG INFO

How to Repair In Windows 10, There was an Issue with Resetting Your Computer 

You may receive the unsuccessful message There was a difficulty resetting your PC in any of the aforementioned conditions, and you will be unable to boot into Windows. So let’s take a look at the many options for resolving this issue.

Method 1: Perform a Startup/Automated Repair 

Step 1: Insert your Windows bootable installation DVD and restart your computer.

Step 2: After that, you’ll be prompted to select any key to boot and then any key to continue.

Step 3: Select the language that best suits your needs and then continue. The next step is to select the option for repair.

Step 4: Next, select the troubleshoot option.

Step 5: Select advanced from the drop-down menu in the open dialogue box.

Step 6: After that, you must choose between automatic repair and startup repair.

Step 7: The final step is to wait for the procedure to finish.

Check if your computer is operating now by restarting it.

Method 2: Rebuild BCD and Fix Boot Image

Step 1: To begin, open a command prompt and select advanced options.

Step 2: Write the following codes in the order listed below, pressing enter after each line.

bootrec.exe /FixMbr bootrec.exe /FixBoot bootrec.exe /RebuildBcd bootrec.exe /FixBoot bootrec.exe /FixBoot bootrec.exe /FixBoot bootrec.exe

Step 3: Don’t worry if the above-mentioned code fails. You can use the following commands:

bcdedit /export bcdedit /export bcdedit / C:\BCD Backup
c: cd boot attrib bcd -s -h -r ren cd boot attrib bcd -s -h -r ren /RebuildBcd c:bootbcd bcd.old bootrec

Step 4: Close the command prompt and restart your computer to see if the problem has been repaired.

This strategy works well in most cases, but we also have a number of alternative options.

Method 3: Use System File Checker and Perform a Disk Check

Step 1: Simply open the command prompt again, as we did before.

Step 2: In the command prompt, type the command and hit enter after each line.

sfc/scannow/offbootdir=c:\/offwindir=c:\

Windows

c:/f /r /x chkdsk

Simply ensure that the drive you’re using is recognised by Windows.

Step 3: To check the problem state, exit and restart your computer.

Method 4: Restore the System 

Step 1: To begin, insert the Windows installation DVD and select the language of your choice before proceeding.

Step 2: From the bottom, select the option to repair your computer.

Step 3: After that, you must pick between troubleshooting and advanced choices.

Step 4: After that, select System Restore and then follow the on-screen directions.

Step 5: Restart your computer to see if the problem has been resolved.

Method 5: Rename the Hives in the System and Software Registry

Step 1: Launch the command prompt, then navigate to the advanced settings screen.

Step 2: Type the following code into the console and hit enter after each command.

ren system system.001 ren software software.001 cd percent windir percent system32config ren system system.001 ren software software.001

Step 3: At this point, you can exit the command prompt and go to the Windows recovery environment screen.

Step 4: Continue if you want to boot your Windows, and I am confident that the problem of there was a problem resetting your PC will be resolved following a reboot.

Method 6: Recover Data from a Hard Drive

Please only use this method if you are confident, as it has the potential to delete your personal files.

Step 1: Insert the USB recovery device into your computer and turn it on.

Step 2: You will then be requested to press any key, which you must do.

Step 3: Select the language that best suits your needs and click Next. Then, using the bottom left option, fix your computer.

Step 4: In the resulting Windows, pick troubleshoot first, and then select advanced.

Step 5: In the advanced options window, choose either the recover from drive or system image recovery option.

Step 6: Following the instructions on the screen, you should be able to complete the work.

Method 7: Use a Recovery USB to Recover Your PC

Step 1: Connect your USB recovery drive to your computer in the first step.

Step 2: Open cmd once more, and then go to the advanced options screen.

Step 3: In the cmd, type notepad and then hit enter.

Step 4: The next step is to right-click the file and select open in notepad.

Step 5: Gather all of your files and transfer them to the USB stick that you will boot later.

Step 6: Once you’ve figured out the drive, write it down and hit enter.

Step 7: After that, type setup and press enter.

Step 8: This will open the Windows installation window, and all you have to do now is follow the on-screen directions to complete a clean Windows installation.

Method 8: Repair Install Windows 10

If you’ve tried all of the above ways and still can’t solve the problem, it’s possible that the problem is with your hard drive.

It’s possible that the HDD was deleted. As a result, the only option available to you in this situation is to install a fresh copy of Windows.

Read Also:

  1. IRQL_NOT_LESS_OR_EQUAL
  2. Microsoft Compatibility Telemetry
  3. System Interrupts High CPU Usage

Conclusion

We’ve gone through all of the possible remedies to the “There Was a Problem Resetting Your PC in Windows 10/8.1/8” problem.

We hope you have gained some new knowledge. Please email us if you have any other ideas or methods for solving the problem besides these.