It’s easy to pair AirPods with other Apple products. If you have an iOS device, you may simply remove it from its case and hold it near your device until a popup appears. Some users, however, have complained that dirt and firmware problems often prevent this feature from functioning properly.
Some users have complained that their previously reliable AirPods suddenly stopped pairing with their iOS device. This AirPods connection issue can be easily fixed by performing a factory reset or cleaning the AirPods, as well as some simple software debugging. Below, we’ll discuss each of these options in detail.
Why Won’t My AirPods Connect to My iPhone?
AirPods are a fantastic gadget that can simplify your life significantly. Apple’s wireless Bluetooth headphones and earbuds have evolved through several generations to the current state of the art, the AirPods Pro.
These gadgets have become increasingly common, so it’s annoying when they don’t work with your iPhone, like the AirPods. However, not everyone has an easy time with their AirPods’ usual convenience.
Having trouble syncing your AirPods with an iPhone or other Apple device is the most frequently reported issue. In most cases, you can handle this problem on your own, without a lot of assistance.
Before diving into debugging, though, it’s a good idea to familiarize yourself with a few potential causes of your AirPods’ inability to connect. There’s no more juice in your AirPods:
Your AirPods are out of battery: If your AirPods or their charging case have run out of juice or are experiencing a charging-related hardware issue, this will occur.
Apple iPhone issues: It’s possible that the Apple gadget has hardware issues or has been damaged. The Bluetooth in your phone is likely broken, the most common cause of this problem.
Problems with your AirPods’ hardware: You won’t be able to link your AirPods with other devices if they are broken, unclean, or otherwise unusable.
You’re out of range: You are not in Bluetooth range because your iPhone, iPad, or other Bluetooth-enabled device is too far away from your AirPods.
Although not exclusive, the aforementioned are the most common reasons for AirPod malfunctions. After investigating potential causes, we can go on to fixing the problem.
How to Fix My AirPods Connect to My iPhone
If you own an iPhone, iPad, or Mac, the AirPods are a great way to add wireless audio to your devices. The ease of pairing with Apple devices is another amazing feature of the headphones.
But, as is the case with any piece of electronic machinery, there will inevitably be occasions when things don’t go as planned. If you’re wondering why your AirPods won’t connect, you’ve come to the right place.
1. Make Sure Your AirPods Have Enough Charge
Low battery percentage is a common reason of AirPods connection problems, albeit it is not always the case. Low battery on your AirPods can cause them to disable features, including Bluetooth connectivity.
Therefore, it is prudent to check the battery life of your AirPods before using them. Here’s how to see how much juice is left in your AirPods:
With both AirPods inside the charging case, open the top. The remaining battery life of your AirPods can be seen shown on the charging case’s status light.
Verify the status light’s hue. When the AirPods’ charging status indicator becomes green, they are fully charged; when it turns amber, there is less than a full charge left. If the AirPods don’t illuminate, though, the batteries are dead.
2. Reset Your AirPods
The simplest but most reliable fix is to simply reset your AirPods. Problems with your AirPods’ settings or firmware are to be expected as regular use continues. If you need to reset your AirPods, here’s how:
Step 1: Return your AirPods to their carrying case and snap shut the top. Just a moment, please.
Step 2: Navigate to Bluetooth in the Settings app on your iOS device.
Step 3: Select the AirPods’ (i) info button. Then, confirm your choice to “Forget This Device.”
Step 4: If the status light is blinking amber, release the setup button and the light will switch to white.
Step 5: Bring your AirPods close to your gadget and pair them.
3. Clean the AirPods
Over time, earwax and dirt can accumulate in your AirPods from repeated use. This can cause interference with the proximity sensors and disrupt the connection.
Follow these simple steps to clean your AirPods:
Step 1: Put some alcohol on a cotton swab and a toothbrush.
Step 2: Clean the AirPods and charging case by gently brushing their nooks and crannies.
Step 3: To remove embedded particles, use a toothpick.
Step 4: Use an alcohol-soaked lint-free cloth to remove the dust and grime.
4. Update Your AirPods’ Firmware
Firmware is responsible for all data processing in modern electronics, including AirPods. Apple publishes firmware upgrades to fix problems, like connectivity issues, reported by consumers.
However, if your firmware is out of date, you may experience connectivity problems that have been addressed in more recent updates. Maintaining up-to-date firmware on your AirPods is highly suggested.
Step 1: First, you should verify the AirPods’ firmware version. This is the way to achieve that goal.
Step 2: Click “Bluetooth” in “Settings.”
Step 3: Select the “i” icon that appears next to your AirPods’ name.
Step 4: Find out what version of software your device is running by looking at the Version.
5. Disable Other Apps
Allowing Bluetooth access is often necessary for third-party programs to function properly. However, when these apps are active, they may prevent other Bluetooth devices, such as AirPods, from connecting to your phone.
During the COVID-19 outbreak, many of us downloaded tracing programs because of this very situation. To check if this is the case, remove the app’s Bluetooth permissions. How? Read on!
Step 1: Select Privacy in the Settings menu.
Step 2: Put the Bluetooth on.
Step 3: The apps that make use of your device’s Bluetooth connection will be displayed.
Step 4: Turn them all off and see if the issue still appears.
Make sure your AirPods are fully charged, that Bluetooth is enabled on the device you’re attempting to pair them with, and that you’ve performed a device reset if necessary. If it doesn’t fix the problem, try disconnecting the AirPods from your device, resetting the AirPods, and then reconnecting them. If it doesn’t help, read on; there are other options.